Nylon-Green Tough 3D Printing Resin

Description
Precautions
Shipping&Tariff

Phrozen Nylon-Green Tough 3D Printing Resin is stretchable, with high impact resistance, and does not break easily.

It is specifically designed for prototyping and functional 3D printed parts.

Benefits
High toughness and impact resistance
Best for prototyping developments

Specs
Weight: 1kg per bottle
Density: 1.10 g/cm3
Viscosity: 742 cP
Surface Hardness: 68 Shore D
Tensile Stress at Break: 19 MPa
Elongation at Break: 30 %
Tensile modulus: 600 MPa
Notched Izod Impact: 23.79 J/m
HTD at 0.45 MPa: 65 °C

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.

Precautions
．Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
．After printing, please keep used resins in a closed & opaque bottle.
．Avoid mixing used resin with new resin.
．Keep resin away from kids and away from direct sunlight exposure.
．Wear gloves and masks when using resins.
．If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
．Please cure it and treat it as general plastic garbage.