Aqua 3D Printing Resin

Specs
Clear Plus

Weight: 1 kg/bottle
Density: 1.09 g/cm3
Viscosity: 50–150 cP
Surface Hardness: 75–80 Shore D
Tensile Strength at Break: 23.6 MPa
Tensile Modulus: 1208.7 MPa
Elongation at Break, EAB: 13 %
Notched Izod Impact: 52.2 J/m
HDT at 0.45 MPa: 49.3 ℃

Macaroon Series

Weight: 1 kg/bottle
Color: Macaroon Yellow / Green / Purple
Density: 1.1–1.3 g/cm3
Viscosity: 140–250 cP
Surface Hardness: 80–86 Shore D
Tensile Strength at Break: 20.2 - 30.6 MPa
Tensile Modulus: 1254–1574 MPa
Elongation at Break, EAB: 1.1–5.4 %
Notched Izod Impact：22.3–31.2 J/m
HDT at 0.45 MPa: 47.5–55.4 ℃

Green

Weight: 500g/1kg/5kg per bottle
Density: 1.12 g / cm3
Viscosity: 125 cps
Surface Hardness: 86 Shore D
Tensile Strength at Break: 24 MPa
Elongation at Break: 21%
Notched Izod Impact: 1.81 J/m

Blue

Weight: 500g/1kg per bottle
Density: 1.12 g/cm3
Viscosity:130 cP
Surface Hardness: 86 Shore D
Tensile Strength at Break: 24 MPa
Elongation at Break: 21%
Notched Izod Impact: 1.81 J/m

Clear

Weight: 1kg per bottle
Density: 1.11 g/cm3
Viscosity: 50 - 100 cps
Surface Hardness: 74 Shore D
Tensile Strength at Break: 22 MPa
Elongation at Break: 14 %
Notched Izod Impact: 21.00 J/m
*All specifications have been tested in a laboratory. Certain specifications are subject to change without prior notice. For the latest update, please refer to Phrozen’s official website.

Precautions
．Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
．After printing, please keep used resins in a closed & opaque bottle.
．Avoid mixing used resin with new resin.
．Keep resin away from kids and away from direct sunlight exposure.
．Wear gloves and masks when using resins.
．If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
．Please cure it and treat it as general plastic garbage.