Aqua 8K 3D Printing Resin Gray/Snow-Gray/Vanilla/Red-Clay

Phrozen’s Aqua 8K 3D Printer Resin is specifically formulated to showcase super-fine detail in full 8K resolutions. Works best with Phrozen’s 8K printers; Phrozen Aqua 8K Resin is now available in 4 colors to fulfill all your 3D printing needs.

Ｍodel Credit: @criptastudios @E.Joe Art

Benefits
【Low Shrinkage & High Precision】 Phrozen Aqua 3D Printing Resins are developed for low shrinkage and high precision printing. Their low warpage & dimensional stability are especially good for precise parts.
【Low Viscosity & Low Odor】Phrozen Aqua 3D Printing Resins are easy to print and are easily post-processed due to their low viscosity. Meanwhile, their low odor will not make your place smell.
【Wide Application】Printed parts are tough and resilient. Phrozen 3D Printing Resins make them a perfect match not only for painted models but also for industrial applications.

Specs
Phrozen Aqua-Gray 8K

Weight: 1kg per bottle
Density: 1.10 g/cm3
Viscosity: 280-380 cP
Surface Hardness: 82 Shore D
Tensile Stress at Break: 43 MPa
Tensile modulus: 1730 MPa
Elongation at Break, EAB: 8 %
Notched Izod Impact：10.00 J/m
HDT at 0.45MPa: 77 ℃
*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.

Precautions
Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
Keep resin away from kids and away from direct sunlight exposure.
Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
DO NOT dump resin. Please cure it and treat it as general plastic garbage.